To Next PageTo Next Page
Need help?Do you have a question about the JL Audio 300/2 and is the answer not in the manual?
Details the design and manufacturing standards for user enjoyment.
Recommends professional installation by authorized dealers for optimal performance.
Provides contact information for technical assistance and inquiries.
Advises caution against high sound pressure levels to prevent hearing loss.
Emphasizes recording the serial number for service or theft records.
Specifies 12V negative-ground systems and prohibits aircraft use.
Guides on optimal heat sink exposure and mounting positions for cooling.
Highlights safety precautions and common installation errors to avoid.
Describes Absolute Symmetry™ Class AB technology and R.I.P.S. power supply.
Provides a step-by-step guide for installing the amplifier in a vehicle.
Details connecting power wires, fusing, and establishing a solid ground connection.
Advises on protecting wires from damage and routing them safely.
Specifies the necessity and type of fuse for the main power wire.
Explains how to connect the remote turn-on lead for amplifier activation.
Guides on selecting the appropriate input voltage range for source units.
Describes how to match source unit output to the amplifier for optimal clean output.
Details filter modes, slopes, and frequency selection for audio tuning.
Outlines the flexible preamp output modes for system expansion.
Explains R.I.P.S. design and impedance compatibility.
Warns about issues with loads below 1.5Ω stereo or 3Ω bridged.
Covers bridging operation, requirements, and input connections.
Explains the function of Power, Thermal, and Low Ω indicator lights.
Details conditions causing amplifier shutdown, like low voltage.
Provides guidelines for amplifier servicing and contacting technical support.
A chart mapping detents to actual frequencies for the amplifier filter.
A step-by-step guide to setting input sensitivity for optimal output.
A chart correlating impedance to target voltage for sensitivity adjustment.
Steps to diagnose and resolve issues where the amplifier does not power on.
Solutions for problems related to distorted or weak speaker output.
Addresses causes for the amplifier shutting down during operation.
Guides on troubleshooting when the amplifier turns on but produces no sound.
Explains how to fix fluctuating output caused by physical impact.
Details fuse value, inputs, topology, and power supply design.
Lists rated power output, THD, S/N ratio, frequency response, and damping factor.
Specifies filter types, slopes, frequency ranges, and preamp output modes.
Provides physical dimensions and notes on specifications.
A diagram for documenting switch and control settings during installation.
Outlines the warranty period, coverage, and limitations for US customers.
Details conditions that will void the warranty, such as serial number removal.
Explains how to send products for service and provides contact details.
Clarifies that international warranties are handled by local distributors.
General
