Jonsered GC2126C User Manual

24
TECHNICAL DATA
Technical data
GC2126C
Engine
Cylinder displacement, cm
3
28
Cylinder bore, mm 35
Stroke, mm 28.7
Idle speed, rpm 2800--3200
Recommended max. fast idle speed, rpm 11000
Speed of output shaft, rpm 8000
Max. engine output, acc. to ISO 8893, kW 0,8
Catalytic converter muffler No
Speed--regulated ignition system Yes
Ignition system
Manufacturer/type of ignition system Walbro/CD
Spark plug Champion RCJ--8Y
Electrode gap, mm 0,6
Fuel and lubrication system
Manufacturer/type of carburetor Zama
Zama
Fuel tank capacity , litre 0,4
Weight
Weight without fuel, cutting attachment and guard, kg 5,0
Noise emissions
(see note 1)
Sound power level, measured dB(A) 110
Sound power level, guaranteed L
WA
dB(A) 114
Noise levels
(see note 2)
Equivalent noise pressure level at the operators’ ear,
measured according to EN/ISO 1 1806 and ISO 22868,
dB(A), min./max. 93/96
Vibration levels
Vibration levels at handles, measured according to
EN/ISO 11806 and ISO 22867
FRONT HANDLE
Idling, m/s
2
, min./max. 2,9/4,7
Racing, m/s
2
, min./max. 3,1/6,2
REAR HANDLE
Idling, m/s
2
, min./max. 1,9/2,6
Racing, m/s
2
, min./max. 5,5/8,4
Note 1: Noise emissions in the environment measured as sound power (L
WA
) in conformity
with EC directive 2000/14/EC.
Note 2: Equivalent sound pressure level is calculated as the time-weighted energy total for
sound pressure levels under various working conditions with the following time distribution:
1/2 idling and 1/2 max speed.
NOTE! The noise pressure level at operator’ s ear and vibrations on the handles are mea-
sured with all the approved cutting attachments for the machine. The table indicates the
lowest and highest values.

Jonsered GC2126C Specifications

General

Brand	Jonsered
Model	GC2126C
Category	Trimmer
Language	English