25
TECHNICAL DATA
Model GC2126C (M10 LH arbor shaft thread) -- Centre hole in blades/cutters, ∅ 25,4 mm
Approved accessories Type Cutting attachment / guard, part. no.
Grass blade/grass cutter Grass 255--4 1 inch 503 93 42--02 / 545 081 703
(∅ 250 4--teeth)
Trimmer head T25 537 33 83--02 / 545 081 703
Plastic blades T ricut 300 mm 531 00 38--11 / 545 081 703
Support cup Fixed --
Attachments Part. no.
Cultivator attachment with shaft 952 71 1 907 / 537 42 54--01
Edger attachment with shaft 952 711 908 / 537 19 69--01
Blower attachment with shaft 952 71 1 911
Pruner attachment with shaft 952 71 1 910 / 537 18 33--16
Clean sweep attachment with shaft 537 19 67--01
Hedge trimmer attachment with shaft 537 19 66--05 / 537 19 66--06
Trimmer attachment 537 35 35--01
DECLARATION OF CONFORMITY
EC Declaration of Conformity (Only applies to Europe)
We, Husqvarna Outdoor Products Italia, S.p.A., Valmadrera, Italy. Tel: +39--0341--203211,
declare that the grass trimmer model Jonsered GC2126C from serial numbers
2006--319N00001 and onwards (the year is clearly stated on the rating plate, followed by the
serial number), comply with the requirements of the COUNCIL’S DIRECTIVES:
of 22 June 1998 “relating to machinery” 98/37/EC, annex IIA;
of 3 May 1989 “relating to electromagnetic compatibility” 89/336/EEC, and applicable
supplements; and
of 8 May 2000 “relating to the noise emissions in the environment” in accordance with Annex
Vof2000/14/EC. The measured sound power is 1 10 dB(A), the guaranteed sound power is
114 dB(A). The cutting width is 431 mm.
The following standards have been applied:EN12100--1:2003, EN 12100--2:2003, EN ISO
11806:1997 and CISPR 12:2001.
SMP, The Swedish Machinery T esting Institute, Fyrisborgsgatan 3 S--754 50 Uppsala,
Sweden, has carried out voluntary type approval. The certificate(s) are numbered:
SEC/07/1157.
1 5 -- 1 1 -- 0 6
Michael S. Bounds, Director
Product Safety and Standards
Handheld Consumer Products
To Next Page
Loading...
Need help?
General
