English---25
545186870 Rev. 2 4/30/09
TECHNICAL DATA
Model GC2128C (M10 LH arbor shaft thread) -- Centre hole in blades/cutters, ∅ 25,4 mm
Approved accessories Type Cutting attachment / guard, part. no.
Grass blade/grass cutter Grass 255--4 1 inch 504 00 13--03 / 545 081 703
(∅ 250 4--teeth)
Trimmer head T25 537 33 83--02 / 545 081 703
Plastic blades Tricut 300 mm 531 00 38--11 / 545 081 703
Support cup Fixed --
Attachments Part. no.
Cultivator attachment with shaft 952 711 907
Edger attachment with shaft 952 711 908
Blower attachment with shaft 952 711 911
Pruner attachment with shaft 952 711 910
DECLARATION OF CONFORMITY
EC Declaration of Conformity (Only applies to Europe)
We, Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46--36--146000, as authorised
representative inthe Community,declare that thegrass trimmermodel Jonsered GC2128C
from serial numbers 2009--031N00001 and onwards (the year is clearly stated on the rating
plate, followed by the serial number), comply with the requirements of the COUNCIL’S
DIRECTIVES:
of 22 June 1998 “relating to machinery” 98/37/EC, annex IIA;
of15December2004“relatingtoelectromagneticcompatibility”2004/108/EC,andapplicable
supplements; and
of 8 May 2000 “relating to the noise emissions in the environment” in accordance with Annex
Vof2000/14/EC. The measured sound power is 110 dB(A), the guaranteed sound power is
114 dB(A). The cutting width is 43 cm.
The following standards have been applied:EN12100--1:2003, EN 12100--2:2003, EN ISO
11806:1997 and CISPR 12:2005.
SMP, The Swedish Machinery Testing Institute, Fyrisborgsgatan 3 S--754 50 Uppsala,
Sweden, has carried out voluntary type approval. The certificate(s) are numbered:
SEC/09/1291.
09--01--31
Ronnie E. Goldman, Director of Engineering
Handheld Consumer Products
To Next Page
Loading...
Need help?
General
