- 17 -
ENGLISH
The lamps will light up alternately.
Example) The thread trimming function is assigned to the displayed number "
" of the input function
setting connector.
1) Select function number 12 according to the function
setting method.
2) Select the item of
"
"
by switch
3
.
3) Select the displayed number "
" by means of
switch
2
.
4) S
elect
"
"
thread trimming function by switch
3
.
5) Fix
" "
thread trimming function by switch
2
.
6) Set activation of signal by switch
3
. If the thread
trimming is performed by
"
Low
"
signal, set the dis-
play to
"
"
, and if the thread trimming is performed
by
"
High
"
signal, set the display to
"
"
.
7) The above function is xed by switch
2
.
8) The option input is ended by switch
2
.
9) Select the item of
" "
by switch
3
, and return to
the function setting mode.
To Next Page
Loading...
Need help?
General
