−92 −
(2) Information
Setting and checking of various data can be performed with the information.
For the information, there are the operator level and the maintenance personnel level.
[Operator level]
1. Turn ON the power. When the needle bar is not in the UP position, turn the handwheel to bring the
needle bar to its UP position.
2. Press switch 1 to display the information screen.
3. Press switches 3, 5 corresponding to the various functions.
[Maintenance personnel level]
1. Turn ON the power. When the needle bar is not in the UP position, turn the handwheel to bring the
needle bar to its UP position.
2. Press switch 1 for approximately three seconds to display the information screen.
3. Press switches 2 through 8 corresponding to the various functions.
Information screen (Maintenance personnel level)
3 :Sewing common data
5 : Sewing management
information
2 : Ver display
3 :Sewing common data
4 : Function setting
5 : Sewing management
information
6 : Communication mode
7 : Hook adjusting mode
8 : Smart media format
Information screen (Operator level)
1
1
3
5
23 4
567
8
To Next Page
Loading...
Need help?
General
