–
50
–
Standard adjustment
* The motor comes in three dierent types according to the destination. They are
dierent in the screw locations, etc. However, the standard adjustment value is
same.
28. Tension of the belt
WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the
following work after turning the power o and ascertaining that the motor is at rest.
❶
2.5 to 5 mm
(A)
❸
❷
1.96N
(200g)
100/120 V type
220 - 240 V type
❸