– 5 –
12. HOW TO INSTALL THE NEEDLE
13. HOW TO THREAD THE MACHINE HEAD
14. ADJUSTING THE
STITCH LENGTH AND
REVERSE STITCHING
WARNING :
To protect against possible personal injury due to abrupt start of the
machine, be sure to start the following work after turning the power
off and ascertaining that the motor is at rest.
WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the following
work after turning the power off and ascertaining that the motor is at rest.
– 2 –
2. INSTALLING THE THREAD STAND
3.
INSTALLING THE HANDWHEEL
4.
ADJUSTING THE BELT TENSION
5. INSTALLING THE BELT COVER
10 mm
9.8N
Adjust the belt tension with the height of the motor so that the
belt sags 10 mm when the center of V belt is applied with a 9.8N
load.
Handwheel
Motor pulley
WARNING :
To protect against possible personal injury due
to abrupt start of the machine, be sure to start
the following work after turning the power off
and ascertaining that the motor is at rest.
WARNING :
To protect against possible personal injury due
to abrupt start of the machine, be sure to start
the following work after turning the power off
and ascertaining that the motor is at rest.
To Next Page
Loading...
Need help?
General
