Juniper J2300 Quick Start Quide

Possible completions:
accounting Show accounting profiles and records
aps Show Automatic Protection Switching information
arp Show system Address Resolution Protocol table entries
as-path Show table of known autonomous system paths
bfd Show Bidirectional Forwarding Detection information
bgp Show Border Gateway Protocol information
chassis Show chassis information
class-of-service Show class-of-service (CoS) information
cli Show command-line interface settings
configuration Show current configuration
connections Show circuit cross-connect connections
dialer Show dialer information
dlsw Show DLSw information
---(more 93%)---
To use command completion, type the first few letters of a command and press the
Spacebar or the Tab key.
For example, when you type the following partial command, the system completes
the command show chassis hardware and displays hardware information:
root> sh<tab> ch<tab> h<tab>
Hardware inventory:
Item Version Part number Serial number Description
Chassis JN000212AA J2300
Routing Engine RevX1.8 710-009989 CORE97133 RE-J.1
FPC 0 RevX1.5 710-009991 CORE96352 FPC
PIC 0 2x FE, 2x Serial
Type the following partial command to display the JUNOS software version running
on the router:
root> sh ver
Hostname: host
Model: j2300
JUNOS Software Release [8.0-20060607.0] (Export edition)
To access configuration mode, enter the configure command. The prompt changes
to a pound sign (#).
root> configure
root#
To activate changes to the configuration, enter the commit command.
root> commit
root#
To exit configuration mode, enter the exit command. Use the exit command again
to exit the CLI completely.
root# exit
root> exit
root@%
JUNOS CLI Basics ■ 17
JUNOS CLI Basics

Juniper J2300 Specifications

General

Brand	Juniper
Model	J2300
Category	Network Router
Language	English