MX104 Universal Routing Platforms
Quick Start
April 2016
Part Number: 530-062013
Revision 02
This document describes how to install the Juniper Networks
®
MX104 Universal Routing Platform.
Contents
MX104 Quick Start Description | 3
Step 1: Prepare the Site for MX104 Router Installation | 5
Step 2: Install the Router | 7
Tools Required to Install the Router in a Rack | 7
Install the MX104 Router in the Rack | 7
Step 3: Ground the MX104 Router | 9
Tools Required to Ground the MX104 Router | 9
Connect the Grounding Cable | 9
Step 4: Connect External Devices and Cables | 12
Connect the Router to a Network for Out-of-Band Management | 12
Connect the Router to a Management Console Device | 12
Connect MIC Cables to the MX104 Router | 13
Step 5: Connect Power to the MX104 Router | 15
Connect AC Power to an AC-Powered MX104 Router | 15
Connect DC Power to a DC-Powered MX104 Router | 16
Step 6: Perform Initial Software Configuration | 21
Enter Configuration Mode | 21
Configure User Accounts and Passwords | 22
Configure System Attributes | 22
Commit the Configuration | 23
Safety Warnings | 25
1
To Next Page
Need help?
General
