EasyManuals Logo
Home>Junkers>Gas Heater>miniMAXX WR 11-2 B Series

Junkers miniMAXX WR 11-2 B Series User Manual

Junkers miniMAXX WR 11-2 B Series
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
Operating instructions
? ??? ??? ??? (YYYY/MM)
12
5 Operating instructions
5.1 Batteries
Battery insertion
B Insert the two 1.5 V R20 batteries.
Fig. 6 Inserting the batteries
Replacing the batteries
The batteries must be changed if the red LED starts
flashing.
Fig. 7 Replacing the batteries
Precautions when using the batteries
Do not dispose of batteries as domestic waste. Take
them to appropriate collecting places for recycling.
Do not insert flat batteries.
Only use the type of batteries indicated
5.2 Before starting up the heater
B Check if the gas indicated on the rating plate is the
same as the one used at the location.
B Open the gas valve.
B Open the water valve.
5.3 Turning the heater on and off
Turning on
B Press the switch , position .
Fig. 8
Green light on = Main burner on
Fig. 9
Turning off
B Press the switch , position .
5.4 Power adjustment
Lower water temperature.
Less power.
Open all water and gas blocking devices.
Purge the pipes.
Caution:
The front panel in the burner and pilot
burner area may reach high temperatures,
with risk of burning in case of contact.
Caution:
B Initial startup must be performed by a
qualified technician who will provide
the client with all the necessary infor-
mation for optimum operation of the
gas heater.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Junkers miniMAXX WR 11-2 B Series and is the answer not in the manual?

Junkers miniMAXX WR 11-2 B Series Specifications

General IconGeneral
BrandJunkers
ModelminiMAXX WR 11-2 B Series
CategoryGas Heater
LanguageEnglish

Related product manuals