30
5 Maintenance
5 Maintenance
Your JURA has the following integrated maintenance programmes:
U
Rinsing the machine (‘Rinse the coffee system’)
U
Rinsing the fine foam frother (‘Rinse the milk system’)
U
Cleaning the fine foam frother (‘Clean the milk system’)
U
Changing the filter (‘Filter’)
U
Cleaning the machine (‘Clean’)
U
Descaling the machine (‘Descale’)
E Carry out each maintenance programme when you are
prompted to do so.
E Press the
‘Pc’ button to view a list of the maintenance pro-
grammes. When the bar is completely filled with red, your
JURA will prompt you to perform the appropriate mainte-
nance programme.
You can start coffee system rinsing manually at any time.
T Place a receptacle under the coffee spout.
T Press the
‘Pc’ button.
T Press the
‘>’ button.
T Press the
‘Rinse the coffee system’ button to start the rinse
operation.
‘Machine is rinsing’, water flows out of the coffee spout. The
operation stops automatically.
After each milk preparation, the JURA prompts you to perform a milk
system rinse.
E In programming mode, you can set whether the milk system
rinsing is to be prompted 10 minutes after preparation or initi-
ated automatically (see Chapter 4 ‘Permanent settings in pro-
gramming mode – Milk system rinsing’).
Precondition:
‘Rinse the milk system’ is displayed.
Rinsing the machine
Rinsing the milk system
To Next Page
Need help?
General
Weight and Dimensions
