Jura WE8 User Manual

31
5 Maintenance
T Place a receptacle under the fine foam frother.
T Press the
‘Pc’ button.
‘Milk system is being rinsed’, the fine foam frother is rinsed.
The operation stops automatically.
To ensure that the fine foam frother always works properly, you
must clean it daily when you have been preparing milk.
If the wrong cleaning agent is used, the machine could be damaged
and/or traces could be left behind in the water.
T Use only original JURA maintenance products.
E JURA milk system cleaner is available from specialised dealers.
E To clean the milk system, use the container supplied.
T Press the
‘Pc’ button.
T Press the
‘Clean the milk system’ button.
‘Clean the milk system’
T Press the ‘Start’ button.
T Press the
‘Next’ button.
‘Clean the milk system’ / ‘Milk system cleaner’
T Remove the milk pipe from the milk container or carton.
T Add milk system cleaner to the front part of the container
up to the bottom mark (indicated by 6).
T Then fill with water up to the upper mark.
T Place the container under the fine foam frother.
T Connect the milk pipe to the container.
E To connect the milk pipe to the container correctly, the pipe
must be fitted with a connector.
Cleaning the milk system
CAUTION
6
é
è
6

Jura WE8 Specifications

General

Product type	Espresso machine
Self-cleaning	Yes
Capacity in cups	- cups
Milk adding type	Automatic
Coffee input type	Ground coffee
Coffee maker type	Fully-auto
Appliance placement	Countertop
Water tank capacity	3 L
Coffee beans capacity	500 g
Maximum operating pressure	15 bar
Reservoir for brewed coffee	Cup
Number of temperature settings	3
Cord length	1.1 m
Display type	TFT
Product color	Black, Silver
Drip/spout adjustment	Vertical
AC input voltage	220–240 V
AC input frequency	50 Hz

Weight and Dimensions

Depth	444 mm
Width	295 mm
Height	419 mm
Weight	10000 g