JVC 1010MTH-SW-MT User Manual

v
DTS-HD
For setting audio output to “BITSTREAM” or “PCM”.
Setting Values Description
BITSTREAM Use this setting when connecting a
device that is able to decode “DTS-HD”.
PCM Audio input will be changed and output as
“PCM”.
Use this setting when connecting a device
that is unable to decode “DTS-HD”.
v
AAC
For setting audio output to “BITSTREAM” or “PCM”.
Setting Values Description
BITSTREAM Use this setting when connecting a
device that is able to decode “AAC”.
PCM Audio input will be changed and output as
“PCM”.
Use this setting when connecting a
device that is unable to decode “AAC”.
Memo:
v
Audio sound may not be properly played back if the audio
equipment in use does not support “BITSTREAM” output.
In this case, set to “PCM”.
m
DV IN AUDIO SETTING
For changing the audio recording settings during DV input.
Setting Values Description
STEREO 1 Records the audio sound during video
recording (L1, R1).
STEREO 2 Records audio sound that is added later
(L2, R2), such as during editing.
MIX Records “STEREO 1” and “STEREO 2”
sounds.
m
BD MIX SOUND
For setting a mixture of BD video secondary audio and
operation sounds output.
Setting
Values
Description
OFF Outputs main audio only.
ON Outputs a mixture of BD video secondary
audio and operation sounds during playback
of BD-Videos that contain BD video
secondary audio and menu operation
sounds.
Memo:
v
Output is converted to Dolby Digital or DTS according to
the main audio when the “DIGITAL OUT” item is set to
“BITSTREAM”.
Display
.
1-
4'6740
&+52.#;
105%4''0)7+&'#761
$.7'$#%-10
105%4''05#8'4
15&.#0)7#)''0).+5*
':+6
5'.'%6
5'672
m
ON SCREEN GUIDE
For displaying operation details.
Setting Values Description
AUTO Appears for five seconds when an
operation is performed.
OFF Not displayed.
m
BLUE BACK
For setting the screen display when there is no signal input.
Setting Values Description
OFF Displays screen as it is.
ON Switches display to a blue screen.
m
SCREEN SAVER
For setting whether to use a screensaver.
Setting
Values
Description
OFF Screen saver is not used.
ON Screen saver is used. Switches to the burn-
in prevention screen when the unit is not
operated for more than five minutes.
m
OSD LANGUAGE
For setting the language for messages displayed on-screen.
Settings Menu
79

JVC 1010MTH-SW-MT Specifications

General

Brand	JVC
Model	1010MTH-SW-MT
Category	Blu-ray Player
Language	English