JVC 70 Series User Manual

S-|
CONNECTIONS
CONNECTING S-VHS VIDEO ACCESSORIES (VCR OR CAMCORDER)
Keeping the audio connections the same as for a non-S-VHS VCR or camcorder (page 7), use the special
S-VHS cable that came with the VCR or Camcorder. (This illustration is of an S-VHS VCR hookup — the same
connections apply for an S-VHS camcorder.)
1) S-VHS Plug out from VCR in to TV's S-Video input
©) Reler to your VCR or camcorder instructions.
CONNECTING TO EXTERNAL AMPLIFIER
RIGHT FRONT
SPEAKER
LEFT FRONT
SPEAKER
AMPLIFIER
Set the TV Speaker to OFF (page 20), switch the audio output to VARI (page 20), and adjust the sound with the
TV remote’s Vo.ume -/+ button (see page 11).
1) White audio cable out from TV Left Audio output jack in to Amplifier [Left] input.
2) Red audio cable out from TV Right Audio output jack in to Amplifier [Right] input.
O Refer to the amplifier’s instructions.
CONNECTIONS
CONNECTING TO JVC AV COMPU LINK CAPABLE COMPONENTS
JVC
AV Compu Link
Capable
VCR
To AV Compu Link
NOTES:
1) The AV Compu Link cable has a male 3.5 mm (mono) mini plug on each end.
2) If. your JVC brand VCR has A Code/B Code Remote Control Switching (see VCR instructions), using
VCR A Code will switch the TV to Video Input 1. Using B Code will switch the TV to Video Input 2.
3) To connect a JVC HiFi receiver or amplifier for a completely automated home theater, see the HiFi receiver's
instructions for detailed hookup diagrams.
* In order for AV Compu Link to work, the recording tabs must be removed from the VHS tape.

JVC 70 Series Specifications

General

Brand	JVC
Model	70 Series
Category	TV
Language	English