29
Recording Operations
Recording onto a Tape
You can use type I tapes for recording.
• To play a tape, see page 12.
1
Insert a recordable cassette into deck B.
2
Check the tape running direction and Reverse Mode
settings on the display.
To change the direction
Change the Reverse Mode if necessary
3
Start playing the source—“TUNER FM,”
“TUNER AM,” “DVD/CD,”
“USB,” “TAPE-A” or
“AUX.”
• When recording from a disc/USB mass storage class
device, you can also use “Synchronized Recording”
(see page 30).
• When recording from deck A, you can also use
“Dubbing” (see “Dubbing Tapes” on page 30).
REC
START/STOP
REVERSE
MODE
DUBBING
USB
MEMORY
TAPE-A
DISC 1-5
TAPE-B
USB/DISC
REC START
Main unit
Deck B
Deck A
IMPORTANT
It may be unlawful to record or play back
copyrighted material without the consent of the
copyright owner.
Before recording, select the Stereo Mode
(“STEREO”—see page 15) for multi-channel
encoded software to downmix its multi-channel
sound; otherwise, you can only record the front left/
right sound onto a tape.
• The channel level setting (see page 13 and 38)
affects the recording.
Push Insert Close
()
To record on both sides.
•
When using Reverse Mode, start
recording in the forward (
3
) direction.
To record on only one side.
INFO
Main Unit
ONLY
Tape direction indicator
Reverse Mode indicator
Current source
3
2
(forward)
(reverse)
Recording.fm Page 29 Tuesday, November 27, 2007 11:43 AM
To Next Page
Loading...
Need help?
General
