JVC CA-DXU10 Service Manual

(No.MB616<Rev.002>)1-35
SECTION 5
TROUBLESHOOTING
This service manual does not describe TROUBLESHOOTING.
viii) During CHECK mode, press '8' key on REMOTE CONTROL to view DVD module
EEPROM content in +1 address step.
(2 seconds)
(Static)
ix) During CHECK mode, press '9' key on REMOTE CONTROL to perform TEMPERATURE
SENSOR VALUE.
(2 seconds)
(Static)
PE E
jcc jjc
cj
EPM
T
jcc jjc
cj
x) During CHECK mode, press '10' key on REMOTE CONTROL to perform SEARCH
DVD_DL PARALLEL DISC DESIGNATED POSITION and JITTER MEASUREMENT
(2 seconds)
(Static)
DD-D VL
jcc jjc
cj
xi) During CHECK mode, press '0' key on REMOTE CONTROL to perform monitor output.
(2 seconds)
(Static)
xii) During CHECK mode, press '+10' key to INITIALIZE DVD module EEPROM.
NIM OT
jcc jjc
cj
ITI
N
xiii) During CHECK mode, press PLAY key on REMOTE CONTROL to start PLAYING
and obtain LASER CURRENT and JITTER value.
(2 seconds)
(Static)
RJTL SI
jcc jjc cj
xiv) During CHECK mode, press STOP key on REMOTE CONTROL to stop JITTER
measurement.
(Static)
jcc jjc cj
FDW
b) During CHECK mode, at any time press MENU key to exit CHECK mode and return to
starting screen of DVD TEST MODE.
OR

JVC CA-DXU10 Specifications

General

Brand	JVC
Model	CA-DXU10
Category	Speaker System
Language	English