– 11 –
English
Selecting the Sound Modes
You can select one of the 3 SEA (Sound Effect Amplifier)
modes. This function only affects the playback sound, but
does not affect your recording.
On the unit:
Press the sound mode button you want to get
the effect of ROCK, POP, or CINEMA. The
selected Sound Mode name “ROCK”, “POP”,
or “CINEMA” appears on the display. Also,
the Sound Mode indicator that corresponds to
the selected sound mode blinks.
To cancel the effect, press the selected mode button again.
On the remote control:
To select the sound modes, press SOUND
MODE until the sound mode you want appears
on the display.
• The sound modes change as follows:
SEA (Sound Effect Amplifier) modes:
ROCK: Boosts low and high frequency. Good for
acoustic music.
POP: Good for vocal music.
CINEMA: Good for special effect sound from movie.
OFF: The sound mode is cancelled. The SOUND
MODE bar indicator goes off.
Select any Sound Modes will turn off Sound Turbo.
The SOUND MODE indicator
also lights up on the display.
SOUND
MODE
CINEMA
ROCK
POP
OFF (Cancelled)
S.MODE
CA-MXSK_ENUE01-12.p65 17/10/03, 9:32 AM11
To Next Page
Loading...
Need help?
General
