To Next Page

To Previous Page

English

Speaker input connection

Connect the subwoofer to the front speaker or rear speaker output cords of the audio components.

Notes:

• Read the instruction manuals for the connected components such as the audio components as well as this instruction

manual.

• In a computer-equipped vehicle, when you remove the

⊖

terminal of the battery, the memory may disappear, or a defect

may occur in the electrical system of the vehicle. Consult your dealer for further details.

• When the audio components incorporates a DSP, do not connect to the rear output, as the low-frequency reproduction

effect may be attenuated due to the DSP effect.

Example

The following shows a typical connection for effective car stereo enjoyment. Connect your system by referring to the example.

Connections

LINE IN

SP.L

INPUT

SP.R

INPUT

※

Audio components

Front or rear speaker

Left Right

②

10-pin connector cord

White

White/

Black

GrayGray/Black

Blue/White

Yellow Yellow

Black

Battery

Car fuse box

(Main fuse)

Car fuse box

Ignition key

switch

Fuse 10A

GND

③

Speaker cord

CW-DRA8

Caution:

Do not distribute the cords in the

paths where they may be caught by

a vehicle part or damaged. Other-

wise, an electric shock or a fire due to

short-circuiting may result.

If there is no power con-

trol terminal in the audio

components, connect the

blue/white wire to the ac-

cessory line (ignition key

switch ACC position line).

If buzzing noise is heard from the speakers when the engine

is running, attach a line noise filter (commercially available) to

the power lead.

Do not bend the vinyl-coated sec-

tion of the speaker cord. Otherwise,

malfunction may result.

Caution:

※

Connect the black lead wire ground terminal directly with a

screw to an unpainted metal part of the vehicle. Turning the

power ON without connecting this terminal is linked to dam-

age of the stereo system. Be sure to connect it.

Also, painted metal panels etc., are not grounded and will

not function correctly. Be careful.

1ENJ.indd4 2017/12/2818:49

Questions and Answers:

Need help?

Do you have a question about the JVC CW-DRA8 and is the answer not in the manual?

JVC CW-DRA8 Specifications

General

Product type	Pre-loaded subwoofer
Subwoofer type	-
Number of drivers	1
Sound pressure level	81 dB
Subwoofer peak power	250 W
Subwoofer driver diameter	200 mm
Subwoofer frequency range	35 - 150 Hz
Subwoofer driver diameter (imperial)	8 \
Product color	Black
Remotely operated	Yes
Remote control type	Wired