18
NOTE
Set the remote control mode selector to
AUDIO before using the number buttons.
This system can store the stop point, and when
you start playback again by pressing DVD/CD
3
(even while on standby), it starts from the position
where you have stopped—Resume Play. The
RESUME indicator lights on the display window
when you stop playback.
How to suspend playback
Perform any of the following operations during
playback.
* Even if the power is turned off by pressing
AUDIO after this, the position where playback
has been stopped will be stored.
To start playback from the stored
position
Press DVD/CD 3.
NOTE
• This function does not work in Program Playback or
Random Playback.
• The position where playback starts again may be a
little different from the stopped position.
• When a disc menu is displayed, the Resume
function may not work.
• The audio language, the subtitle language and the
angle at that time are stored as well as the stopped
position.
• The stored position will be cleared if the disc tray is
opened. Further, if 7 is pressed during playback,
“RESUME” will be displayed. If 7 is pressed again,
the stored information will be cleared.
• At the time of purchase, Resume is set to ON.
Resume can be set to OFF (page 30).
Press 7 once.*
Press AUDIO to turn off the power.
Change the source to USB, FM, AM or AUX.*
Resume Playback
EX-D1[J].book Page 18 Wednesday, March 2, 2005 9:53 PM
To Next Page
Loading...
Need help?
General
