18
Date/Time Insert
This feature allows you to display the date and time in your
viewfinder and on a connected TV.
NOTE:
You should already have performed the Date/Time
Setting procedure (
Z
pg. 9). If you haven’t, do so before
continuing.
DISPLAY
CHOOSE DISPLAY MODE
1
Press DISPLAY during Record–Standby to cycle
through the available modes as shown in the
illustration at left.
NOTES:
●
The selected display can be recorded.
●
If you don’t want to record the display, select Date-off
mode before shooting.
●
If you want to delete the display during shooting, press
DISPLAY.
●
If you want to call back a deleted display, engage the
Record-Standby mode and then press DISPLAY to
select the desired display mode.
RECORDING
Advanced Features
Date display
Time display
Date/Time display
Date/Time-off mode
25.12.96
15:28:43
Date display
25.12. 96
25. 12. 96
15:28:43
Date/Time display
Time display
15:28:43
DISPLAY
To Next Page
Loading...
Need help?
General
