26
PAUSE
Gain Up S.LX
Tele Macro OFF
Interval Timer OFF
Rec Time OFF
JLIP ID NO. 07
Tally ON
Set Character
Date/Time
END :MENU KEY
Gain Up NORM
Tele Macro ON
Interval Timer 1min
Rec Time 1/2s
JLIP ID NO. 07
Tally ON
Set Character
Date/Time
END :MENU KEY
+
–
Using Menu For Detailed Adjustment
This camcorder is equipped with Program Manager, an
easy-to-use, on-screen menu system that simplifies many
of the more detailed camcorder settings.
SELECT MODE
1
Turn the PROGRAM AE select dial to any position
except AUTO LOCK.
ACCESS MENU SCREEN
2
Press MENU.
SELECT FUNCTION
3
Press + or – to place the highlight bar on the desired
function.
MAKE SETTING
4
The setting procedure depends on the function you
select.
If you select Gain Up, Tele Macro, Interval Timer,
Rec Time, JLIP ID NO or Tally. . . .
.... press FAR or NEAR to cycle through the choices
until the desired setting appears.
If you select Set Character or Date/Time, . . .
.... press NEAR to access the selection menu for
each function (Set Character – Z pg. 23; Date/
Time – Z pg. 9).
CLOSE MENU
5
Press MENU. The normal screen reappears.
NOTE:
The menu is available only in the Record-Standby mode.
RECORDING
Advanced Features (cont.)
NEARFAR
If “Gain Up” or “Tele Macro” in the Menu
has been changed from the factory settings,
this mark appears in the viewfinder.
MENU
To Next Page
Loading...
Need help?
General
