JVC GR-AXM250 User Manual

14
Tracking
Eliminates noise bars that appear on-screen during
playback. To activate Manual Tracking:
1) Press the TRACKING Wheel
1 for approx.
2 seconds. “MT”
H appears.
2) Rotate the TRACKING Wheel
1 so that the
noise bars disappear.
•To return to Auto Tracking, press the TRACKING
Wheel
1 for approx. 2 seconds or set the Power
Switch
! to “OFF” and then “PLAY” again. “AT”
H blinks. When Auto Tracking finishes, the
indication disappears.
•When noise bars appear during playback, the
camcorder enters the Auto Tracking mode and
“AT”
H appears.
•Manual Tracking may not work with tapes
recorded on other VCRs or camcorders.
TBC (Time Base Corrector)
Removes jitter from fluctuating video signals to
deliver a stable picture even with old tapes.
To activate/release the TBC mode, press TBC
4
during playback for more than 1 second. When the
TBC mode is activated, “TBC”
S is displayed.
•The “TBC” indicator
S turns green (grey with a
camcorder equipped with a black/white view-
finder) while TBC is working, and white while TBC
is not operative.
•TBC does not work during Still Playback and
Shuttle Search (
 pg. 11).
•It may take a few seconds before TBC actually
starts working.
•The picture may be distorted if the TBC mode is
activated or deactivated at the edit-in/-out points
or when normal playback resumes after Still
Playback or Shuttle Search (
 pg. 11).
•If the playback picture is distorted when TBC is
set to on, turn off TBC.
Counter Memory
Makes it easier to locate a specific tape segment.
1) Press COUNTER R/M
q and hold for more than
1 second. The counter
D resets to “0:00:00”.
2) Press COUNTER R/M
q for less than 1 second.
“M” appears.
3) After recording or playback, press 5
e, then
2 w. The tape automatically stops at or close
to 0:00:00.
4) Press
4 /6 ^ to start playback.
•The counter memory functions in the Fast-
Forward and Rewind modes.
•To disable the counter memory function, press
COUNTER R/M
q for less than 1 second so that
“M” disappears.
GR-AXM250UC 3/11/03, 10:24 AM14

JVC GR-AXM250 Specifications

Power

power source	DC 11 V (Using AC Adapter), DC 6 V (Using battery pack)
power consumption (viewfinder on)	4.3 W
power consumption (LCD monitor on)	4.8 W

Operating Environment

operating temperature	0°C to 40°C (32°F to 104°F)
operating humidity	35% to 80%
storage temperature	–20°C to 50°C (–4°F to 122°F)

Recording Specifications

tape speed (SP)	33.35 mm/sec. (1-5/16 ips)
tape speed (EP)	11.12 mm/sec. (7/16 ips)
recording time (SP)	40 minutes

Connectors

video output	1 V (p-p), 75 Ω unbalanced, analog output
audio output	300 mV (rms), 1 kΩ analog output
AC adapter output	DC 11 V, 1 A

Weight and Dimensions

weight	Approx. 840 g (1.9 lbs)
dimensions	113 mm x 117 mm x 199 mm (W x H x D)
lens filter diameter	40.5 mm