JVC GR-AXM300 User Manual

EN 43
TAPE DUBBING
Tape Dubbing
CONNECT EQUIPMENT
1
Following the illustration at left, connect the
camcorder and the VCR.
PREPARE FOR DUBBING
2
Set the camcorder’s Power Switch to “PLAY”, turn
on the VCR’s power, and insert the appropriate
cassettes in the camcorder and the VCR.
SELECT VCR MODE
3
Engage the VCR’s AUX and Record-Pause modes.
FIND EDIT-IN POINT
4
Engage the camcorder’s Play mode to find a spot
just before the edit-in point. Once it’s reached, press
PAUSE on the camcorder.
START EDITING
5
Press PLAY on the camcorder and engage the VCR’s
Record mode.
STOP EDITING TEMPORARILY
6
Engage the VCR’s Record-Pause mode and press
PAUSE on the camcorder.
EDIT MORE SEGMENTS
7
Repeat steps 4 through 6 for additional editing, then
stop the VCR and camcorder when finished.
VCR (Recording deck)
PLAY/PAUSE
To AUDIO and
VIDEO OUT
connectors
When connecting
the cables, open the
jack cover.
To AUDIO and
VIDEO IN
connectors
Audio and Video
cables (optional)
Power Switch

JVC GR-AXM300 Specifications

General

Camcorder Media Type	VHS-C
Optical Zoom	16x
Image Sensor Size	1/4 inch
Minimum Illumination	1 lux
Microphone Operation Mode	Mono
Connector Type	Composite video/audio output
Display Type	LCD
Display Size	2.5 inch
Type	Camcorder
Image Sensor	CCD
Low Light Performance	1 lux
LCD Screen	2.5 inch
Focus Adjustment	Automatic
White Balance	Automatic
Recording Media	VHS-C
Zoom	16x optical