_lowToAttachTheShoulderStrap
=ollow the illustration,
1 Thread the strap through the eyelet.
2 Fold it back and thread it through the strap
juide and the buckle.
DTo adjust the length of the strap, loosen and then
tighten the strap in the buckle.
3 Slide the strap guide fully towards the eyelet.
Buckle
uL._vu Jf_Lu EN ll
I Power
This camcorder's 2-way power supply system
lets you choose the most appropriate source of
power. Do not use provided power supply units
with other equipment.
ChargingTheBatteryPack
Strap guide =
Eyelet
Open the
AC Adapter
To AC outlet
I Set the Power Switch to "OFF".
2 With the arrow on the battery pack pointing
downward, push the battery pack slightly against
the battery pack mount d).
3 Slide down the battery pack until it locks in
place _2).
4 Connect the AC Adapter to the camcorder.
5 Plug the AC Adapter into an AC outlet. The
POWER/CHARGE lamp on the camcorder
blinks to indicate charging has started.
6 When the POWER/CHARGE lamp goes out,
charging is finished. Unplug the AC Adapter
from the AC outlet. Disconnect the AC Adapter
from the camcorder.
To Next Page
Loading...
Need help?
General
