JVC GR-D250 User Manual

14 EN fal:llllVG blAHII'U
Power-LinkedOperation
When the Power Switch is set to '_" or 1N", you
can also turn on/off the camcorder by opening/
closing the LCD monitor or pulling out/pushing in
the viewfinder.
INFORMATION:
The following explanations in this manual
supposes the use of LCD monitor in your
operation. If you want to use the viewfinder,
close the LCD monitor and pull out the
viewfinder fully.
| LanguageSettings
The language on the display can be changed.
( pg. 22,26,27)
1 Set the Power Switch to "@" while pressing
down the Lock Button located on the switch.
2 Open the LCD monitor fully. (pg. 18)
3 Press MENU. The Menu Screen appears.
4 Press + or - to select
"r_l" and press MENU.
The CAMERA DISPLAY
Menu appears.
5 Press + or -to select
"LANGUAGE", and press
MENU.
6 Press + or - to select
the desired language, and
press MENU.
I Press + or - to select
"tlRETURN", and press
MENU twice. The Menu
Screen closes.
| Date/Time Settings
The date/time is recorded onto tile tape at all
times, but its display can be turned on or off
during playback. (:- pg. 22, 27)
1 Perform steps ! - 4 in "Language Settings"
on the left column.
Press + or - to select "CLOCK ADJ.", and
press MENU. The parameter for "Month" is
highlighted.
3 Press + or -to input
the month, and press
MENU. Repeat to input
the day, year, hour and
minute.
4 Press + or -to select
"tlRETURN", and press
MENU twice. The Menu Screen closes.
CAME£A DISPLAY
| GripAdjustment
1 Adjust the velcro strip.
Pass your right hand
through the loop and grasp
the grip.
3 Adjust your thumb and
fingers through the grip to
easily operate the
Recording Start/Stop
Button, Power Switch and
Power Zoom Lever. Be
sure to fasten the velcro strip to your preference.

JVC GR-D250 Specifications

General

Brand	JVC
Model	GR-D250
Category	Camcorder
Language	English