22 EN
Menus For Detailed Adjustment
The settings below are effective only for video playback except
“REC MODE”
.
SOUND L/R and NARRATION
During tape playback, the camcorder detects the sound mode in which the recording was made, and
plays the sound back. Select the type of sound to accompany your playback picture.
Each setting (except “OFF” in “ON SCREEN”, “DATE/TIME”, and “TIME CODE”) is linked with
“DISPLAY”, which appears when the Power Switch is set to
“REC”
.
The parameters (except
“OFF”
in “ON SCREEN” setting) are the same as in the description on (
墌
20).
Each setting (except “DEMO MODE”) is linked with “SETTING”, which appears when the Power
Switch is set to “REC”. The parameters are the same as in the description on page 墌 21.
.
Playback Menus
Menus Settings: [ ] = Factory-Preset
PLAYBACK
SOUND L/R [STEREO ]: Sound is output on both “L” and “R” channels in stereo.
SOUND L : Sound from the “L” channel is output.
SOUND R : Sound from the “R” channel is output.
NARRATION Although it is not possible to perform audio dubbing with this
camcorder, you can hear sound from an audio-dubbed tape during
playback using this function.
[OFF]: Original sound is output on both “L” and “R” channels in stereo.
ON: Dubbed sound is output on both “L” and “R” channels in stereo.
MIX: Original and dubbed sounds are combined and output in stereo
on both “L” and “R” channels.
DUB/COPY
REC MODE 墌 20,
“REC MODE”
.
Menus Settings: [ ] = Factory-Preset
DISPLAY
ON SCREEN OFF / [LCD] / LCD/TV
When set to “OFF”, the camcorder’s display disappears.
DATE/TIME [OFF] / AUTO / ON
TIME CODE [OFF] / ON
墌 15, “Time Code”.
WIDE TV [ON] 16:9 / OFF 4:3
墌 20, “WIDE TV”.
LCD BRIGHT 墌 13, “Brightness Adjustment Of The Display”.
SETTING
Menus For Detailed Adjustment
GR-D850AA_EN.book Page 22 Thursday, October 18, 2007 5:26 PM
To Next Page
Loading...
Need help?
General
