EN
11
–
RETURN
–
–
DSC
TYQUAL I
REC SELECT
FINE
021X7486
IMAGE SIZE
y
r
%
t
Loading A Memory Card
(GR-D90/D70 only)
The provided memory card (GR-D90 only) is already
inserted in the camcorder when you receive the
camcorder.
1 Make sure the camcorder’s power is off.
2 Open the LCD monitor (墌 pg. 47, u Monitor Open
Button), then open the card cover (MEMORY CARD)
p.
3 Insert the memory card clipped edge first.
• Do not touch the terminal on the reverse side of the
label.
4 To close the card cover p, push it until you hear a
click.
To Unload A Memory Card:
In step 3 push the memory card, which then comes out
of the camcorder automatically. Pull it out and close the
card cover p.
Picture Quality/Image Size Setting
(GR-D90/D70 only)
The Picture Quality/Image Size can be selected to best
match your needs. Refer to the chart on page 18 for
your selection.
1 Set the VIDEO/DSC Switch 4 to “DSC”, then set
the Power Switch y to “ ” while pressing down the
Lock Button t located on the switch. The POWER/
CHARGE lamp r lights and the camcorder turns on.
2 Press the MENU/VOLUME wheel % in. The Menu
Screen appears.
3 Rotate the MENU/VOLUME wheel % to select
“ (DSC)” and press it.
4 Rotate the MENU/VOLUME wheel % to select
“QUALITY” and press it. The Sub Menu appears.
Rotate the MENU/VOLUME wheel % to select the
desired mode and press it.
5 Rotate the MENU/VOLUME wheel % to select
“IMAGE SIZE” and press it. The Sub Menu appears.
Rotate the MENU/VOLUME wheel % to select the
desired mode and press it.
6 Rotate the MENU/VOLUME wheel % to select
“ RETURN”, and press it twice. The Menu Screen
closes.
GETTING STARTED
p
u
Memory card
Clipped edge
Label
NOTES:
● Be sure to use only SD Memory Cards marked “ ”
or MultiMediaCards marked “
”.
● Some brands of memory cards are not compatible with
this camcorder. Before purchasing a memory card ,
consult its manufacturer or dealer.
● Before using a new memory card, it is necessary to
FORMAT the card.
墌 pg. 22.
ATTENTION
Do not insert/remove the memory card while the
camcorder is turned on, as this may cause the memory
card to be corrupted or cause the camcorder to
become unable to recognize whether or not the card is
installed.
Display
NOTE:
In the 1024 x 768 mode, images are shot in 720 x 480
pixels and they are converted and stored in the 1024 x 768
file size.
1 GR-D90/70/30US EN 01-11 02.11.6, 3:09 PM11
To Next Page
Loading...
Need help?
General
