JVC GR-DA20EK User Manual

14 EN Getting Started
You can check the remaining battery power
and the recordable time.
Set the Power Switch to “REC” or “PLAY”
(墌 11).
Press DATA, and the battery status screen
appears.
● Press DATA again to return to the normal
screen.
● Data battery status cannot be displayed
during playback or while recording is in
progress.
● If “COMMUNICATION ERROR” appears
instead of the battery status even though
you tried to press DATA several times, there
may be a problem on the battery. In such a
case, consult your nearest JVC dealer.
Perform step in “Charging The Battery
Pack” (墌 13).
The language on the display can be changed.
(墌 24)
Set the Power Switch to “REC” or “PLAY”
(墌 11).
● If set to “REC”, the recording mode
should be set to “M”
(墌 11).
Press MENU.
Select “SYSTEM”, press SET or .
Select “LANGUAGE”, press SET or .
Select the desired language, press
SET or .
Press MENU.
Press whenever you want to return to the
previous menu screen.
The date/time is recorded onto the tape at all
times, but its display can be turned on or off
(墌 23, 25).
Perform steps
– in “Language Settings”.
Select “DISPLAY”, press SET or .
Select “CLOCK ADJ.” press SET or .
Select the desired date display format,
press SET or .
● Repeat this step to input time display format
(Select from “24h” or “12h”), month, date,
year, hour and minutes.
Press MENU.
Press whenever you want to return to the
previous menu screen/setting.
Data Battery System
Using AC Power
1
1
1
1
2
2
2
2
LEVEL
MAX TIME
115min
100%
50
0
BATTERY CONDITION
4
4
4
4
Language Settings
Date/Time Settings
LANGUAGE
ENGLISH
FRANCAIS
NEDERLANDS
ITALIANO
ESPAÑOL
2
A
SET
Select
1
1
1
1
2
2
2
2
3
3
3
3
4
4
4
4
5
5
5
5
6
6
6
6
CLOCK ADJ.
DATE. MONTH. YEAR 24 h
2 : 26
6 .
2007
9 .
A
B
Select
SET
1
1
1
1
2
2
2
2
1
1
1
1
2
2
2
2
3
3
3
3
4
4
4
4
GR-DA20EK.book Page 14 Thursday, August 2, 2007 12:08 PM

JVC GR-DA20EK Specifications

General

Brand	JVC
Model	GR-DA20EK
Category	Camcorder
Language	English