28 EN
Features for recording Editing
NIGHT :
Makes dark subjects or areas even brighter
than they would be under good natural
lighting. Although the recorded image is not
grainy, it may look as if it is strobing due to
the slow shutter speed. During Night-Scope,
it may be diffi cult to bring the camcorder
into focus. To prevent this, use of a tripod is
recommended.
[ ] = Factory-preset
EFFECT
[OFF]:
Disables the function.
SEPIA
J:
Recorded scenes have a brownish tint like old
photos.
MONOTONE
K:
Like classic black and white fi lms, your footage
is shot in B/W.
CLASSIC
L:
Gives recorded scenes a strobe effect.
STROBE
M:
Your recording looks like a series of
consecutive snapshots.
MIRROR
:
Creates a mirror image on the left half of the
screen, juxtaposed to the normal image on the
other half.
[ ] = Factory-preset
SHUTTER
[OFF]:
Disables the function.
1/50
SHUTTER 1/50:
The shutter speed is fi xed at 1/50th of a
second. Black bands that usually appear when
shooting a TV screen become narrower.
1/120
SHUTTER 1/120:
The shutter speed is fi xed at 1/120th of a
second. The fl ickering that occurs when
shooting under a fl uorescent light or mercury-
vapour lamp is reduced.
SHUTTER 1/500/SHUTTER 1/4000:
(Refer to “PROGRAM AE” - “SPORTS H”
mode ( 27).
[ ] = Factory-preset
Dubbing To A VCR
To use this camcorder as a player
1
Following the illustration, 18,
“Connections To A TV Or VCR”, connect
the camcorder and the VCR’s input
connectors.
2
Perform steps
1
–
4
To stop dubbing, stop recording on
the VCR, then stop playback on the
camcorder.
To choose whether or not the following
displays appear on the connected TV
• Date/Time
Set “DATE/TIME” to “ON” or “OFF” ( 21).
• Time Code
Set “TIME CODE” to “ON” or “OFF” ( 21).
• On Screen
Set “ON SCREEN” to “OFF”, “LCD” or
“LCD/TV” ( 21).
Note:
It is recommended to use the AC Adapter as
the power supply instead of the battery pack
( 11).
To Next Page
Loading...
Need help?
General
