To Next PageTo Next PageTo Previous PageTo Previous Page
What to do if my JVC GR-DV3000A is not recording?
If your JVC Camcorder is not recording, ensure that the tape’s erase protection tab is set to “REC.” Also, check that the Power Switch is set to “ ” or “ ”. Make sure the VIDEO/MEMORY Switch is set to “VIDEO.” If “TAPE END” appears, replace the cassette. Finally, ensure the cassette holder cover is closed. If the VIDEO/MEMORY Switch is set to “VIDEO” set it to “MEMORY.”
What to do if the memory card will not load properly on JVC Camcorder?
If your JVC Camcorder memory card will not load properly, make sure the memory card is in the correct position.
Why there is no playback picture on the connected TV from JVC Camcorder?
To get a playback picture on the connected TV from your JVC Camcorder, set “S/AV INPUT” to “OFF” in the Menu Screen. The camcorder might be in Record-Standby mode because the analogue input mode is engaged.
Why the charger indicator on the AC power adapter/ charger does not light on JVC GR-DV3000A?
To prevent the charger indicator on the AC Power Adapter/ Charger from not lighting on your JVC Camcorder, it is recommended to charge the battery in places with a temperature of 10°C to 35°C. Charging is difficult in places subject to extremely high/low temperatures.
What to do if an error indication (E01, E02 or E06) appears on JVC GR-DV3000A Camcorder?
To resolve an error indication (E01, E02 or E06) on your JVC Camcorder, remove the power supply (battery pack, etc.) and wait a few minutes for the indication to clear. A malfunction of some kind has occurred, making the camcorder’s functions unusable.
What to do if an error indication (E03 or E04) appears on JVC Camcorder?
To resolve an error indication (E03 or E04) on your JVC Camcorder, eject the cassette once and re-insert it, then check if the indication clears. A malfunction of some kind has occurred, making the camcorder’s functions unusable.
Why does the color of snapshot look strange on JVC Camcorder?
If the colors in your JVC Camcorder's Snapshot mode look strange, it could be due to the light source or subject lacking white, or various light sources behind the subject. Try to find a white subject and compose your shot so that it also appears in the frame. Also, check if the Sepia or Monotone mode is activated and turn them off if they are.
Why does recording end before 5 seconds have elapsed in 5-second mode on JVC Camcorder?
If the 5-Second mode recording ends before 5 seconds have elapsed on your JVC Camcorder, it's possible that the 5-Second mode is set to “Anim.” in the Menu Screen. Change the setting to “5S” in the Menu Screen.
Why the black & white fader does not work on JVC GR-DV3000A?
To resolve the issue of the Black & White Fader not working on your JVC Camcorder, turn off Sepia and Monotone modes.
Why during R.A.Edit, the dissolve function does not work on JVC Camcorder?
To fix the issue of the Dissolve function not working during R.A.Edit on your JVC Camcorder, turn off Sepia or Monotone before adding Dissolve to a scene transition. Also, ensure that you have selected the mode of Programme AE with special effects you want before starting editing.
General| Recording Media | MiniDV |
|---|---|
| Optical Sensor Size | 1/4 inch |
| Optical Sensor Type | CCD |
| Optical Zoom | 10x |
| Digital Zoom | 200x |
| Display Type | LCD |
| Display Size | 2.5 inch |
| Image Stabilizer | Electronic |
| Focus Adjustment | Automatic/Manual |
| Microphone | Stereo |
| Battery Type | Lithium-Ion |
| Viewfinder | Color |
| Image Stabilization | Electronic |
| Battery | BN-V408U |
| Video Resolution | 720 x 480 |
| Connector Type | USB, AV, S-Video |
| Video Format | DV |
| Interface | IEEE 1394 (FireWire) |
