JVC GR-DVA10 User Manual

32
PLAYBACK Advanced Features
Using Menus For Detailed Adjustment
The following procedure applies to all except Synchro
Comp (c¥ pg. 48, 49).
Set the Power Switch to “GEM” while pressing down
the Lock Button located on the switch,
Press the MENU/BRIGHT wheel. The Menu Screen
appears.
Recording Start/Stop Button
Display
Menu Screen
* Each setting is linked with “DISPLAY MENU”,
which appears when the Power Switch is set
to "W” (CF pg. 25). The parameters are the
same as in the description on pg. 25.
NOTES:
© It is also possible to change the ON SCREEN
settings by pressing DISPLAY on the remote
control (provided).
© “REC MODE" can be set when the Power
Switch is set to “CEQ” or “WH” (=F pg. 13,
23),
© If “ON SCREEN” is set to “SIMPLE”, it keeps
the camcorder's display (except the date,
time and time code) from appearing on the
connected TV. it also makes the playback
sound mode and tape speed disappear on the
camcorder.
Rotate the MENU/BRIGHT wheel to select the
desired function icon, and press it. The selected
function menu appears,
Rotate the MENU/BRIGHT wheel to select the
desired function, and press it to display the Sub
Menu,
Rotate the MENU/BRIGHT wheel to select the
desired parameter and press it. Selection is complete.
Rotate the MENU/BRIGHT wheel to select
“@RETURN" and press it twice to close the Menu
Screen
SOUND MODE | £9" pg. 33.
12BIT MODE F pg. 33.
SYNCHRO © pg. 49.
REC MODE Allows you to set the
video recording mode (SP
or LP) depending on your
preference (C7 pg. 13).
It is recommended you
use “REC MODE" in the
“VIDEO MENU” when
using this camcorder as a
recorder during digital
dubbing (CF pg. 39).
3 VIDEO MENU
ON SCREEN* Makes the camcorder's
indications appear/
disappear from the
connected TV screen.
DATE/TIME* Makes the date/time
appear/disappear on the
camcorder.
TIME CODE* Makes the time code
appear/disappear on the
camcorder.
(@ DISPLAY MENU
Playback Sound
During playback, the camcorder detects the sound made in which the recording was made, and plays the
sound back. Select the type of sound to accompany your playback picture. According to the menu access
explanation on pg. 32, select “SOUND MODE” or “12BIT MODE” from the Menu Screen and set it to the
desired parameter.
STEREO
‘Sound
is
output
on
both
“L”
and
“R”
channels
in
stereo.
SOUND L
SOUND R
SOUND MODE ‘Sound from the “L” channel is output in stereo.
Sound from the “R” channel is output in stereo.
SGURO1
SOUND 2
Original sound is output on both “L” and “R” channels in stereo.
12BIT MODE Dubbed sound is output on both “L" and “R” channels in stereo.
Mix Original and dubbed sounds are combined and output in stereo on
both “U" and “R” channels in stereo. Ez
: Factory-preset
NOTES:
© The “SOUND MODE? setting is available for both 12-bit and 16-bit sound. (In previous models’ functions,
“12-bit” is called “32 kHz" and “I6-bit” is called “48 kHz”,)
‘© The camcorder cannot detect the sound mode in which the recording was made during fast-forward or
rewind. During playback the sound mode is displayed in the upper left corner.
Display
‘ON SCREEN set
For playback sound, tape DATE/TIME setting TIME CODE setting:
speed and tape running. For date/time. For time code.
{ISBT TTSOUNDT SF

JVC GR-DVA10 Specifications

General

Brand	JVC
Model	GR-DVA10
Category	Camcorder
Language	English