EN5
• AC Power Adapter/
Charger AA-V20EG
or AA-V20EK
• Remote Control
Unit RM-V711U
• Battery Pack
BN-V207U
• DC Cord
• Lithium Battery CR2025
(for remote control unit)
• Editing Cable
TW
• Shoulder Strap
• Cable Adapter
• Audio/Video (A/V) Cable
[RCA plug to RCA plug]
• S-Video Cable
PROVIDED ACCESSORIES
• Core Filter
(for optional DV cable)
• Core Filter (for provided
editing cable or optional
JLIP cable*)
* Necessary for use with
optional software.
12 3
How to Attach The Core Filter
Attach the provided Core Filter to the provided editing cable, optional DV cable or optional JLIP cable.
The Core Filter reduces interference.
1.
Release the
stoppers on both
ends of the Core
Filter.
2.
Run the cable through the Core Filter, leaving
approx. 3 cm of cable between the cable
plug and the Core Filter. Wind the cable
around the outside of the Core Filter as
shown in the illustration.
•Wind the cable so that it is not slack.
NOTE:
Take care not to damage the cable.
3.
Close the Core Filter until it
clicks shut.
Connect the end of the cable
with the Core Filter to the
camcorder.
3 cm
Stopper
Editing cable and JLIP cable:
Wind once.
DV cable: Wind twice.
To Next Page
Loading...
Need help?
General
