34 EN
–DPOF
ALL
SELECT
RESET
ALL
–
EXECUTE
CANCEL
DPOF
P
L
A
Y
O
F
F
Setting Print Information (DPOF Setting)
This camcorder is compatible with the DPOF (Digital
Print Order Format) standard in order to support future
systems such as automatic printing, which records
information about the still images you wish to print (such
as the number of prints to make). There are 2 print
information settings available: “To print all still images
(one print for each)” explained below and “To print by
selecting still images and no. of prints” ( pg. 35).
TO PRINT ALL STILL IMAGES (ONE PRINT
FOR EACH)
1
Set the VIDEO/DSC Switch to “ ”, then set the
Power Switch to “ ” while pressing down the
Lock Button located on the switch. Open the LCD
monitor fully or pull out the viewfinder fully.
2
Press the MENU Wheel in. The Menu Screen
appears.
3
Rotate the MENU Wheel to select “ MEMORY”
and press it. The MEMORY Menu appears.
4
Rotate the MENU Wheel to select “DPOF” and press
it. The Sub Menu appears.
5
Rotate the MENU Wheel to select “ALL” and press
it. Selection is complete. The Confirmation Screen
appears.
6
Rotate the MENU Wheel to select “EXECUTE” and
press it. The normal playback screen appears.
•To cancel selection, rotate the MENU wheel to
select “CANCEL” and press it.
To Reset The Setting . . .
.... select “RESET” in step 5. The setting is reset to 0 for
all still images.
MENU Wheel
DPOF Menu
D.S.C. PLAYBACK
(cont.)
Display
Power Switch
Lock Button
Confirmation
Screen
VIDEO/DSC Switch
To Next Page
Loading...
Need help?
General
