12 EN
GETTING STARTED
(cont.)
MultiMediaCard
Clipped edge
Card Cover
Loading A MultiMediaCard
The provided MultiMediaCard is already inserted in the
camcorder when you receive the camcorder.
1
Make sure the camcorder’s power is off.
2
Open the card cover.
3
Insert the MultiMediaCard clipped edge first.
•Do not touch the terminal on the reverse side of the
label.
4
To close the card cover, push it until you hear a click.
NOTES:
●
Be sure to use only MultiMediaCards marked
“ ”.
●
Some brands of MultiMediaCards are not compatible
with this camcorder. Before purchasing a
MultiMediaCard, consult its manufacturer or dealer.
To Unload A MultiMediaCard . . .
.... in step 3 push the MultiMediaCard, which then comes
out of the camcorder automatically. Pull it out and
close the card cover.
ATTENTION:
Do not insert/remove the MultiMediaCard while the
camcorder is turned on, as this may cause the
MultiMediaCard to be corrupted or cause the
camcorder to become unable to recognize whether or
not the card is installed.
Label
To Next Page
Loading...
Need help?
General
