34 EN
S ET
AT
VOLUNE
TAPE END
SP
M 1
:
23
:
45
4
PLAYBACK
Basic Playback
1
LOAD A CASSETTE
Slide EJECT to open the cassette holder, then insert
the cassette with the label facing out. Press PUSH to
ensure the holder is closed and locked.
2
SELECT MODE
Set the Power Switch to “PLAY”. The power lamp
lights.
3
PLAY BACK
Press PLAY/PAUSE (
4
/6). The playback picture
appears.
4
STOP PLAYBACK
Press STOP (5).
Rewind or Fast-Forward the tape
Press REW (
2
) to rewind, or FF (
3
) to fast-forward the
tape during Stop mode.
NOTES:
●
The camcorder shuts off automatically after about 5
minutes in Stop mode. To turn on again, set the Power
Switch to “POWER OFF”, then to “PLAY”.
●
If a blank portion on the tape is played back, the screen
may become black. This is not a malfunction.
Power Switch
Power lamp
REW (
2
) Button
FF (
3
) Button
PLAY/PAUSE (
4
/6)
Button
STOP (5) Button
Tape running indicator
4
: Playback
3
: Fast-Forward/
Forward Search
2
: Rewind/Reverse
Search
6 : Still Playback
Tape counter
Battery pack remaining power indicator
Viewfinder indications
EJECT Switch
Recording mode indicator
Downloaded from: https://www.usersmanualguide.com/
To Next Page
Loading...
Need help?
General
