22
\
Score Sync
The primary camera recorder can send the same score to up to 3 registered replica
camera recorders.
Caution:
●
All the camera recorders to be linked
are presupposed to be in the same
network segment.
●
There will be a delay when sending
score information from the primary
camera recorder to the replica camera
recorders.
●
The delay time may vary depending on
the communication status.
●
This function is exclusively for the
scoreboard function. It cannot be used
with the overlay function on broadcast
video.
●
The replica camera recorder setting
(Replicas List) cannot be saved.
If the camera recorder has been
restarted, re-enter the settings at the
replica camera recorder setting.
Preparation
●
Set [Overlay Settings] → [Type] to
Sports (baseball, etc.).
●
Congure the replica camera recorder
to the same sports score setting.
Creating the Replica List
Caution:
●
Congure only at the primary camera
recorder. Do not change the settings
on the replica camera recorders.
1
Open the Web screen and select the
[Settings] tab.
The [Settings] page cannot be opened
once live streaming starts.
To Next Page
Loading...
Need help?
General
