–18–
4 Click [OK].
Windows
®
2000: If a message indicating that the
device can be safely removed appears, click [OK]
and then click [Close].
5 Disconnect the USB cable.
6 Set the camera’s power switch to off.
The camera turns off.
This manual only refers to software installation
and PC connection. For more details of each
software, refer to its User’s Guide/Help/Readme.
8 CyberLink DVD Solution
Following steps are the example of CyberLink
PowerDirector Express NE.
1 Click [Start], go to [All Programs] or
[Programs]– [CyberLink PowerDirector
Express], and then click User’s Guide/Help/
Readme depending on your preference.
* The model name depends on the connected
camera.
User’s Guide/Help/Readme
(Windows
®
)
INFORMATION
The programs in CyberLink DVD Solution are
versions with limited functionality. The User's
Guide and Help files are written for the
commercial version available in stores. For
information about the differences with the
commercial version, see the Readme file or the
following web site: http://www2.cli.co.jp/
products/ne/ for the respective program.
To Next Page
Loading...
Need help?
General
