16
EN
Basic
Playback
Features
Changing display information
Press DISPLAY during playback.
Each time you press the button, the front panel display
shows the time counter and the clock time alternately.
● To display the VCR status including the time counter
and the clock time on the TV screen, see “Showing on-
screen display” (墌 pg. 21).
To reset the time counter, press C. RESET on the
Remote. The counter reading becomes “0:00:00”. It is
also reset when a tape is inserted.
Checking tape position
The tape position indicator
appears on screen in the
following cases:
● When you change the VCR
operation mode from the
stop mode to fast forward or
rewind mode.
● When you perform an Index
Search (墌 pg. 18) or Instant Review (墌 pg. 18).
The position of “
” in relation to “B” (Beginning) or “E”
(End) shows you where you are on the tape.
NOTES:
●
"SUPERIMPOSE" must be set to “ON”, or the indicator will
not appear (
墌
pg. 28, 29 ).
●
It may take a few seconds for the tape position indicator to be
displayed.
Playing back tape repeatedly
— Repeat Play
You can play back a tape repeatedly (100 times).
While playing back a tape, press and hold PLAY ( 3 )
for more than 5 seconds.
The play indicator ( # ) on the front display panel starts
flashing slowly, and a tape will be played back 100
times.
To stop playback, press STOP ( 7 ) on the Remote or
STOP/EJECT ( 7 / 0 ) on the front panel.
C
A
COUNT 0:33:27
BE
+++
B
Time Counter
Clock Time
BASIC PLAYBACK AND RECORDING (cont.)
SP EP
VCR
D
–1, 2, 3
STOP/EJECT
( 7 / 0 )
–2
1
7
89
2
4
1
3
2 3
4 5 6
0
A
A
C
F
–a, b, c
F
–a
F
–C
F
–b
E
D
STOP ( 7 )
C. RESET
To Next Page
Loading...
Need help?
General
