JVC KD-A805 User Manual

Troubleshooting
What appears to be trouble is not always serious. Check the following points before calling a service center.
• Sound cannot be heard from the speakers.
• Adjust the volume to the optimum level.
"!
• Check the cords and connections.
<II
• The unit does not work at all.
Reset the unit (see page 3).
c
<II
\.:J
• "Connect Error" appears on the display.
Remove the control panel, wipe the connector, then
attach it again (see page 3).
• SSM automatic presetting does not work.
Store stations manually.
==
• Static noise while listening to the radio. Connect the antenna firmly.
~
Yo
• II AM" cannot be selected.
Check the <Source Select> - <AM Source> setting
(see page 33).
• Disc cannot be played back.
Insert the disc correctly.
• CD-R/CD-RW cannot be played back.
• Insert a finalized CD-R/CD-RW.
• Tracks on the CD-R/CD-RW cannot be
• Finalize the CD-R/CD-RW with the component which
skipped.
you used for recording.
~
• Disc can neither be played back nor ejected. • Unlock the disc (see page 10).
'"
• "No Eject" appears on the display.
• Eject the disc forcibly (see page 3).
IV
.J:I
>-
IV
• Disc sound is sometimes interrupted. • Stop playback while driving on rough roads.
Q.
'" • Change the disc.
'"
is
• Check the cords and connections.
• Disc cannot be recognized ("No Disc,"
Eject the disc forcibly (see page 3).
"CD Loading Error," or "Eject Error" flashes).
• "Please Eject" appears on the display.
This occurs sometimes due to over-heating. Eject the disc
or change to another playback source.
• Disc cannot be played back.
• Use a disc with MP3/WMA tracks recorded in a format
..:.::
compliant with ISO 9660 Level 1, Level 2, Romeo, or
'"
IV
Joliet.
.J:I
>-
IV
• Add the extension code <.mp3> or <.wma> to the
Q.
c
file names.
==
~
• Noise is generated.
Skip to another track or change the disc. (Do not add the
,."
Q.
==
extension code <.mp3> or <.wma> to non-MP3 or
WMA tracks.)
Continued on the next page
REFERENCES
43
Troubleshooting
What appears to be trouble is not always serious. Check the following points before calling a service center.
• Sound cannot be heard from the speakers.
• Adjust the volume to the optimum level.
"!
• Check the cords and connections.
<II
• The unit does not work at all.
Reset the unit (see page 3).
c
<II
\.:J
• "Connect Error" appears on the display.
Remove the control panel, wipe the connector, then
attach it again (see page 3).
• SSM automatic presetting does not work.
Store stations manually.
==
• Static noise while listening to the radio. Connect the antenna firmly.
~
Yo
• II AM" cannot be selected.
Check the <Source Select> - <AM Source> setting
(see page 33).
• Disc cannot be played back.
Insert the disc correctly.
• CD-R/CD-RW cannot be played back.
• Insert a finalized CD-R/CD-RW.
• Tracks on the CD-R/CD-RW cannot be
• Finalize the CD-R/CD-RW with the component which
skipped.
you used for recording.
~
• Disc can neither be played back nor ejected. • Unlock the disc (see page 10).
'"
• "No Eject" appears on the display.
• Eject the disc forcibly (see page 3).
IV
.J:I
>-
IV
• Disc sound is sometimes interrupted. • Stop playback while driving on rough roads.
Q.
'" • Change the disc.
'"
is
• Check the cords and connections.
• Disc cannot be recognized ("No Disc,"
Eject the disc forcibly (see page 3).
"CD Loading Error," or "Eject Error" flashes).
• "Please Eject" appears on the display.
This occurs sometimes due to over-heating. Eject the disc
or change to another playback source.
• Disc cannot be played back.
• Use a disc with MP3/WMA tracks recorded in a format
..:.::
compliant with ISO 9660 Level 1, Level 2, Romeo, or
'"
IV
Joliet.
.J:I
>-
IV
• Add the extension code <.mp3> or <.wma> to the
Q.
c
file names.
==
~
• Noise is generated.
Skip to another track or change the disc. (Do not add the
,."
Q.
==
extension code <.mp3> or <.wma> to non-MP3 or
WMA tracks.)
Continued on the next page
REFERENCES
43

JVC KD-A805 Specifications

General

Brand	JVC
Model	KD-A805
Category	Car Receiver
Language	English