ENGLISH
4
LOCATION OF THE BUTTONS
Control panel
1 Control dial
2
(standby/on attenuator) button
3 ANGLE button
4 Display window
5 4
/¢ buttons
6 5 (up) button
7 FM/AM button
8 0 (eject) button
9 SEL (select) button
p D DISP (display) button
q Number buttons
w M MODE button
e Remote sensor
r ∞ (down) button
t
(control panel release) button
y For KD-AR3000:
CD/CD-CH (CD changer) LINE button
For KD-LH300:
CD/CD-CH (CD changer) button
Illumination Navigation for easy operations
If you use M MODE or SEL (select), the display and some controls (such as the number buttons,
4
/¢ , 5/∞, and control dial) enter the corresponding control mode, then the controls
start flashing to lead you to the next operational steps. (Illumination Navigation)
• The display shows how these buttons function during this period.
Ex.: When you press number button 1 after pressing M MODE, to operate the FM tuner.
To use these controls for original functions again, wait until the controls stop flashing without
using these controls.
• Pressing M MODE again also restores original functions. However, pressing SEL (select) makes
the unit enters a different mode.
Time countdown indicator
12 3 4 56 7 8
9p q we tr
y
KD-LH300
KD-AR3000
To Next Page
Loading...
Need help?
General
