JVC KD-AV300 User Manual

11
Sound/Display/Other Settings
Select a preset equalizer (EQ)
Press EQ repeatedly to select a preset sound mode — [Flat] (default)/ [Pop] / [User] /
[Techno] / [Rock] / [Classic] / [Jazz] / [Optimal] . (Corresponding sound mode indicator
lights up.)
Store your own sound settings
1 Press EQ repeatedly to select [User] .
2 Press MENU to display the top menu screen.
3 Turn the volume knob to select [Setting] , then press the knob to display the
setting menu.
4 Check that [ ] ( [Setting / Audio] ) is selected, then press the knob.
5 Turn the volume knob to select the item to set ( [Bass] / [Treble] ), then press the
knob.
6 Turn the volume knob to adjust the value, then press T.
7 Repeat steps 5 and 6 to adjust the value for other settings.
8 Press G to exit.
The setting is stored to [User] in EQ.
• If no operation is done for about 10 seconds, the operation will be canceled.
• To return to the previous layer, press T.
Activate HBS (Hyper Bass Sound)
Press HBS. (HBS indicator lights up.)
• To cancel, press the button again.
Change the display brightness (Dimmer)
Press and hold DIMMER repeatedly to select [Dimmer Low] or [Dimmer High] .
Change the general settings/check information on the [Setting] menu
1 Press MENU to display the top menu screen.
2 Turn the volume knob to select [Setting] , then press the knob to display the
setting menu.
3 Turn the volume knob to select the category ( : [Setting / Audio] /
: [Setting / General] ), then press the knob.
4 Turn the volume knob to select the item to set (see the table below), then
press the knob.
5 Turn the volume knob to change the setting, then press the knob.
• If no operation is done for about 10 seconds, the operation will be canceled.
• To return to the previous layer, press T.
• To exit, press G.
Default: XX
Setting / Audio ( )
Bass
−06 — +06 (00): Adjusts the sound elements of the bass tone.
Treble
−06 — +06 (00): Adjusts the sound elements of the treble tone.
Fader
R12 — F12 (00): Adjusts the front and rear speaker output balance.
Balance
L12 — R12 (00): Adjusts the left and right speaker output balance.
Setting / General (
)
Beep
ON / OFF: Activates or deactivates the keypress tone.
Time
12 Hour / 24 Hour: Selects time format.
Adjust: .Adjusts the clock.
Language
English / Spanish: Selects the text language used for on-screen information.
Setting menu
ENGLISH
ENKD-AV300JJWr1.indd11ENKD-AV300JJWr1.indd11 13/10/2112:5613/10/2112:56

JVC KD-AV300 Specifications

General

Brand	JVC
Model	KD-AV300
Category	Receiver
Language	English