11OPERATIONS
Changing the display information
Frequency = Clock = Station name * = (back to the
beginning)
* If no title is assigned to a station, “NO NAME” appears.
To assign a title to a station, see page 41.
Improving the FM reception
When an FM stereo broadcast is hard to receive,
activate monaural mode for better reception.
• See also page 38.
Reception improves, but stereo effect will be lost.
To restore the stereo effect, repeat the same
procedure to select <MONO OFF>.
Listening to the radio
1
Select “
FM
” or “
AM
.”
2
Search for a station to listen—Auto Search.
When a station is tuned in, searching stops. To stop searching, press the same button
again.
• You can also search for a station manually—Manual Search. Hold either one of the
buttons until “M” flashes on the display, then press it repeatedly.
• When receiving an FM stereo broadcast with sufficient signal strength, the ST indicator
lights up on the display.
[Turn] = [Press]
Storing stations in memory
Automatic presetting (FM)— SSM (Strong-
station Sequential Memory)
You can preset up to 18 stations for FM.
1 While listening to a station...
2 Select the preset number range you want to
store.
3
Local FM stations with the strongest signals are
searched and stored automatically.
• To stop searching, press 4 /¢ .
To preset other 6 stations, repeat from step 1 again.
EN10-17_KD-DV5506_001A_3.indd 11EN10-17_KD-DV5506_001A_3.indd 11 2/13/09 3:03:43 PM2/13/09 3:03:43 PM
To Next Page
Loading...
Need help?
General
