ENGLISH
28
Listening to the USB device
You can connect a USB mass storage class device such as a USB memory, Digital Audio Player (USB mass storage class
device), portable HDD, etc. to the unit.
Attaching a USB memory
This unit can play DivX/MPEG Video/MP3/WMA/AAC*/WAV tracks stored in a USB device.
* This unit can play back AAC files encoded using iTunes. This unit cannot play back AAC files purchased from iTunes
Store.
Turn on the monitor to watch the playback picture if you play back a DivX/MPEG file. You can also control playback
by referring to the monitor screen. (See also pages 23 – 26.)
• See pages 20 – 26 for operation using the remote controller.
• See pages 46 and 47 for more settings.
If “
” appears on the monitor when pressing a button, the unit cannot accept the operation you have tried to
do.
• In some cases, without showing “ ,” operations will not be accepted.
USB input terminal
USB memory
Change the display information
• See also pages 17 and 18.
To stop play and detach the USB device
Straightly pull it out from the unit.
• Press SRC to listen to another playback source.
To change the source to “USB” while listening
to other playback source
Press SRC to select “USB” if a USB device is attached.
Playback starts automatically.
• If no USB device is attached, “NO USB” appears on
the display. Press SRC to listen to another playback
source.
EN24-31_DV7302_003A_3.indd 28EN24-31_DV7302_003A_3.indd 28 1/25/07 5:24:25 PM1/25/07 5:24:25 PM
To Next Page
Loading...
Need help?
General
