ENGLISH
7INTRODUCTIONS
Preparation
Cancel the display demonstration and set the clock
• See also page 43.
~ Turn on the power.
Ÿ Enter the PSM settings.
! ] ⁄ Cancel the display demonstrations
Select “DEMO,” then “DEMO OFF.”
Set the clock
Select “CLOCK H” (hour), then adjust the hour.
Select “CLOCK M” (minute), then adjust the minute.
Select “24H/12H,” then “24H” (hour) or “12H” (hour).
@ Finish the procedure.
When the power is turned off: Check the current clock time
When the power is turned on: Change the display information
EN02-07_DV7302_003A_2.indd 7EN02-07_DV7302_003A_2.indd 7 1/10/07 6:22:24 PM1/10/07 6:22:24 PM
To Next Page
Loading...
Need help?
General
