48 SETTINGS
You can assign titles to 30 station frequencies (FM and
AM) using 10 characters (maximum) for each title.
• When is shown on the display, you can
move back to the previous screen by pressing number
button 3.
1 Select “TUNER.”
2 Show the title entry screen.
3 Assign a title.
1 Press number button 4 ( ) repeatedly
to select a character set.
2 Turn the control dial to select a character. (For
available characters, see the right column.)
3 Use 4 /¢ to move to the next (or
previous) character position.
4 Repeat steps 1 to 3 until you finish entering
the title.
4 Store the title.
To erase the entire title
In step 3 on the left column...
Available characters
Upper case
Lower case
Numbers and symbols
Title assignment
EN48-55_KD-DV7406_005A_f.indd 48EN48-55_KD-DV7406_005A_f.indd 48 2/12/08 2:05:12 PM2/12/08 2:05:12 PM
To Next Page
Loading...
Need help?
General
