ENGLISH
17
Continued on the next page
Using voice command
1
“SAY NAME” appears on the display.
2 Speak the name you want to call.
• You can also use voice command from the Dial
Menu. Select “VOICE DIAL” from the Dial Menu.
• If your cellular phone does not support the voice
recognition system, “ERROR” appears on the
display.
Using preset phone number
• See below for presetting.
Presetting the phone number
You can preset up to six phone numbers.
1 Display the Dial Menu.
2 Select “PHONE BOOK *,” “MISSED *,”
“REDIAL *,” or “RECEIVED *” whichever you
want to use. Then select a phone number.
* Displays only when your cellular phone is
equipped with these functions and is compatible
with this unit.
3
Using the Bluetooth audio
player
If playback does not start automatically, operate the
Bluetooth audio player to start playback.
• If playback does not pause when you change the
source, operate the Bluetooth audio player to pause
playback.
Reverse skip/forward skip
Pause/start playback *
* Operation may be different according
to the connected phone.
Enter setting menu (Device list)
• Refer also to page 15 for connecting/disconnecting/
deleting a registered device.
Bluetooth Information:
If you wish to receive more information about
Bluetooth, visit the following JVC web site:
<http://www.jvc-victor.co.jp/english/car/>.
Bluetooth settings
You can change the settings listed on page 18 according
to your preference.
1 Select “BT-PHONE” or “BT-AUDIO.”
2 Enter the Bluetooth menu.
EN16-19_KD-G546_001A_f.indd 17EN16-19_KD-G546_001A_f.indd 17 11/19/07 10:15:31 AM11/19/07 10:15:31 AM
To Next Page
Loading...
Need help?
General
