7
ENGLISH
Radio operations
~
Ÿ
!
Start searching for a station.
When a station is received, searching stops.
To stop searching, press the same button
again.
To tune in to a station manually
In step ! above...
1
2
Select a desired station frequency.
When an FM stereo broadcast is hard to
receive
Reception improves, but stereo effect will be lost.
Lights up when receiving an FM stereo
broadcast with sufficient signal strength.
To restore the stereo effect, repeat the same
procedure. “MONO OFF” appears and the MO indicator
goes off.
Storing stations in memory
You can preset six stations for each band.
FM station automatic presetting —
SSM (Strong-station Sequential
Memory)
1 Select the FM band (FM1 – FM3) you want to
store into.
2
3
“SSM” flashes, then disappears when automatic
presetting is over.
Local FM stations with the strongest signals are
searched and stored automatically in the FM band.
Manual presetting
Ex.: Storing FM station of 92.5 MHz into preset
number 4 of the FM1 band.
1
2
3
Lights up when monaural mode is activated.
88.3
M
MONO
SSM
92.5
Preset number flashes for a while.
P4
EN06-13KD-G635[U]_f.indd 7EN06-13KD-G635[U]_f.indd 7 11/15/06 12:25:15 PM11/15/06 12:25:15 PM
To Next Page
Loading...
Need help?
General
