10
AUDIO SETTINGS
1 Press and hold MENU.
2 Turn the volume knob to select
[EQ SETTING]
or
[AUDIO]
, then press the knob.
3 Turn the volume knob to make a selection (see the following table), then
press the knob.
Repeat step 3 until the desired item is selected.
4 Press MENU to exit.
• To return to the previous hierarchy, press G HD.
Default:
XX
EQ SETTING
EQ PRESET
FLAT /
NATURAL /
DYNAMIC /
VOCAL BOOST /
BASS BOOST /
USER: Selects a preset equalizer.
EASY EQ
Adjust your own sound settings.
SUB.W
*
1
–08 to +08 (00)
BASS LVL –06 to +06 (00)
MID LVL –06 to +06 (00)
TRE LVL –06 to +06 (00)
• The setting is stored to [USER] in [EQ PRESET].
PRO EQ
1
BASS / MIDDLE / TREBLE: Select a sound tone.
2
Adjust the sound elements of the selected sound tone.
BASS Frequency: 60/ 80/ 100/ 200 Hz Default: (80 Hz)
Level: –06 to +06 (00)
Q: Q1.0/ Q1.25/ Q1.5/ Q2.0 (Q1.0)
MIDDLE Frequency: 0.5/ 1.0/ 1.5/ 2.5 kHz Default: (1.0 kHz)
Level: –06 to +06 (00)
Q: Q0.75/ Q1.0/ Q1.25 (Q1.25)
TREBLE Frequency: 10.0/ 12.5/ 15.0/ 17.5 kHz Default: (10.0 kHz)
Level: –06 to +06 (00)
Q: Q FIX (Q FIX)
• The setting is stored to [USER] in [EQ PRESET].
AUDIO
FADER
*
2
*
3
R06 — F06 (00): Adjusts the front and rear speaker output balance.
BALANCE
*
3
L06 — R06 (00): Adjusts the left and right speaker output balance.
BASS BOOST
+01 / +02: Selects your preferred bass boost level. ; OFF: Cancels.
LOUD
LOW / HIGH: Boosts low or high frequencies to produce a well-balanced
sound at low volume. ; OFF: Cancels.
VOL ADJUST
–05 — +05 (00): Presets the volume adjustment level of each source
(compared to the FM volume level). Before adjustment, select the source you
want to adjust. (“VOL ADJ FIX” appears if FM is selected.)
L/O MODE
SUB.W / REAR: Selects whether rear speakers or a subwoofer are connected
to the REAR/SW line out terminals on the rear panel (through an external
amplifier).
SUB.W
*
4
ON / OFF: Turns on or off the subwoofer output.
SUB.W LPF
*
5
THROUGH: All signals are sent to the subwoofer. ; LOW 55Hz / MID 85Hz /
HIGH 120Hz: Audio signals with frequencies lower than 55 Hz/ 85 Hz/ 120 Hz
are sent to the subwoofer.
SUB.W LEVEL
*
5
–08 — +08 (00): Adjusts the subwoofer output level.
BEEP
ON / OFF: Activates or deactivates the keypress tone.
TEL MUTING
*
6
ON: Mutes the sounds while using the cellular phone (not connected through
KS-BTA100). ; OFF: Cancels.
AMP GAIN
LOW POWER: Limits the maximum volume level to 30. (Select if the
maximum power of each speaker is less than 50 W to prevent damaging the
speakers.) ; HIGH POWER: The maximum volume level is 50.
*
1
Displayed only when
[L/O
MODE]
is set to
[SUB.W]
and
[SUB.W]
is set to
[ON]
.
*
2
If you are using a two-speaker system, set the fader level to
[00]
.
*
3
This adjustment will not affect the subwoofer output.
*
4
Displayed only when
[L/O MODE]
is set to
[SUB.W]
.
*
5
Displayed only when
[SUB.W]
is set to
[ON]
.
*
6
Does not work if
[BT ADAPTER]
is selected for
[AUX]
in
[SRC SELECT]
.
To Next Page
Loading...
Need help?
General
