JVC KD-HDW10 User Manual

»
-
Radio operations
o ~SRC1 L FM1/FM2IFM3/AM .--,
/' ,
'. -------------------------,
• {~" rFM1--F::FM3]
" .
' '
Selected band appears on the sub-display.
• Start searching for a station.
When a station is received, searching stops.
•
ST indicator lights up when the unit
receives a stereo signal.
• When an HD Radio station
is received,
the HD indicator and station call sign
appear
on the display.
• A indicator lights up when the unit
receives an HD Radio signal encoded
with
CS II (SRS Circle Surround IFM.)
When an HD Radio station is tuned in ...
Analog signals are received first for a
few seconds before digital signals are
received.
EX.: When receiving conventional FM station
Selected band ST indicator
@i~ ~~]
Selected frequency
EX.: When receiving an HD Radio station
f'. - --- »'<i!!!iC=~~ __ 1
c F~ " • 'J lJ i .. F "A ~
c=: II \If~ " :J ~ • .} T' J~
Call Sign
This indicator lights up when digital audio is
played, while it flashes when analog audio is
played.
To stop searching) press the same button
again.
Only for HD Radio multicast channels:
8 Select your desired channel.
- -., CH 1""'- CH2 ~
:------~CH3 ....--J
Channel number appears on the sub-
display.
EX.: When receiving an HD Radio multicast station
~;;;:::o...::=----I
C r HI' • 'J lJ i .. lJ 11 .~
<DII!L _' If~ " :J L rl JJL/-J--"",CIiJ,,---~
Channel number Channel number
First four letters of Call Sign

JVC KD-HDW10 Specifications

General

Brand	JVC
Model	KD-HDW10
Category	Car Receiver
Language	English